Search

Buffer Strips for Riparian Zones

Iowa is a landscape of fertile soil, agriculture crops, and networks of streams and rivers for drainage of the abundant rainfall. The woodland resource of the state at the time of settlement was concentrated, in part, along these streams and rivers. With settlement and the increased mechanization of agriculture, many of these natural woodland corridors were removed to provide more lands for crop production. These losses resulted in reduced ability of the riparian forest ecosystem to assimilate chemical and soil losses from agriculture lands and because of reduced diversity of the ecosystem, less wildlife habitat.

Management practices for riparian corridors along creeks and streams can be modified for improved benefits. The riparian zone is the last area for interception and biological processing of up-hill materials produced by agriculture practices before they enter the stream. If these zones are kept in perennial vegetation with  extensive and dynamic root system, large quantities of water, associated chemicals, and moving sediments from adjacent fields can be kept on site before they are lost and contribute to water pollution. 

Riparian buffer strips of perennial vegetation contribute to sustainable agriculture by reducing soil loss, improving water quality and stabilizing the banks of the drainage system. Combinations of perennial grasses, forbs and woody vegetation along stream corridors improve aesthetics and wildlife habitat providing increased number and diversity of wildlife populations. Trees are especially valuable because they reduce atmospheric CO2 through carbon storage and provide alternative sources of renewable energy. 

Design of Buffer Strips

The basic design component is multiple rows of trees and shrubs adjacent to the stream with an additional filter of perennial grasses on the outside of the trees. As size of the stream and/or effected watershed increases, the width of the buffer strip must be increased to maintain its effectiveness. 

Minimum total width of a filter strip is 33 feet; spacing between rows and trees within a row varies with species and objectives. Common plantings will be 8 to 10 feet between rows and 4 to 6 feet between trees within the row; shrubs will be planted at closer spacings. 

Tree and shrub species and planting design will vary depending on the site and the ultimate use of the woody vegetation produced. Fast growing hardwoods such as cottonwood and hybrid poplars, silver maple, willows, and green ash can be used on a variety of bottomland sites. Their advantage is that they grow fast and coppice after being harvested. These trees can harvested for biofuels within 4-6 years or can be left longer to produce small dimension lumber and biofuels.  

These trees are harvested in the winter and resprout vigorously in spring producing even more growth than the original stems. As such they continually function in taking up agricultural chemicals during the growing season. It is also possible to produce high quality sawlogs (oak and walnut) by planting the oak and walnut in the middle row of trees with the faster growing species listed above in the outside rows.  

The faster growing species will not become over competitive because they can be harvested on a short-rotation. The high quality species are more site specific and should not be planted in poorly drained soils. The choice of shrubs can include species such as ninebark, red-osier dogwood, Nanking cherry, serviceberry and others. The selection of shrubs should depend on site conditions and wildlife attraction. 

It is recommended that several different species be used on one site. The up-hill grass strip can also be planted to several different permanent cover species.

The establishment of buffer strips will reduce soil loss and ground and surface water pollution, provide improved wildlife habitat, increase diversity of agricultural operations by producing biofuels and timber products, improve the aesthetics of the agricultural landscape and reduce the effects of global warming.

For additional information on buffer strips check out our publication Buffer Strip Design, Establishment, and Maintenance

Nitrogen and Water Quality - Q&A

Due to increased awareness of nutrient management and water quality, Iowa State University Extension and Outreach has received a number of questions about nitrogen movement from Iowa’s cropping systems into surface and subsurface water.  The following frequently asked questions and answers have been prepared to clarify aspects of nitrogen management and nitrogen movement in the soil system. 

Nitrogen Fertilizer 

Q: Is there a legal limit to the amount of fertilizer that can be applied? 
A: For commercial fertilizer, the answer is no. However, from an economic standpoint, farmers choose to balance nutrient applications with a crop yield response. If a farmer over-applies nutrients, then nutrients are wasted and extra dollars are spent, if a farmer under-applies nutrients then a reduction in yield causes loss of revenue.  If the farm operation has livestock or is distributing manure to other acres, and is of a certain size, they are required to apply manure at the rate determined by their state required manure management plan. 

Q. How do farmers determine how much fertilizer they should apply?
A: Nutrients are required to grow Iowa's major crops, corn and soybeans. Farmers and agronomists use soil testing as a means to determine the nutrient-supplying capacity of the soil for certain nutrients and if additional nutrient inputs such as commercial fertilizer or manure applications are needed.  Under-application of nutrients can lead to loss of revenue from loss of crop yield and over-application can also lead to loss of revenue when supplying nutrients beyond what is needed to maximize crop production.  Over-application can also lead to increased risk of loss of nutrients to the environment.   
Determining nitrogen (N) application rates is based on grain yield response to nitrogen rate trials (varying rates of nitrogen inputs compared to yield response).  The goal of conducting nitrogen rate trials is to find the point where the value from grain yield increase by adding more nitrogen matches the cost of the added nitrogen.

This concept, known as the maximum return to nitrogen (MRTN) is the foundation of web-based tool used in Iowa, the Corn Nitrogen Rate Calculator.
Please refer to ISU publication PM 2015, Concepts and Rationale for Regional Nitrogen Rate Guidelines for Corn, for the science behind nitrogen rate guidelines. 

Using soil tests to determine phosphorus (P) and potassium (K) levels in the soil is based on years of soil testing research conducted at Iowa State University.  Soil test values are classified into five categories very low (VL), low (L), optimum (Opt), high (H) and very high (VH).  The categories represent a decreasing probability of economic yield response to applied nutrients.    

Also please refer to ISU publication PM 1688, A General Guide for Crop Nutrient and Limestone Recommendations in Iowa, for P, K, zinc (Zn) and limestone recommendations based on soil testing for major agronomic crops grown in Iowa.   

Q: How do I know if my corn is getting enough, but not excess N? 
A: In-season soil testing including the late spring soil nitrate test (LSNT), measures soil nitrate-N to determine if nitrogen will be adequate or if additional nitrogen is 
needed.  End of season testing, such as the cornstalk nitrate test, can evaluate if more than adequate nitrogen was available to the plant during the growing season. 

Q: Are all sources of nitrogen fertilizer equal in terms of impact on water? 
A: Nitrogen fertilizer undergoes many processes in the soil, many based on microbial activity and conversion, with rates dependent on moisture and temperature. All sources of commercial nitrogen fertilizer are considered immediately available for crop uptake and can have the same impact on water quality. With manure sources, the nitrogen may take longer to become crop available if the nitrogen is in organic forms. Some manure sources have a high fraction of inorganic nitrogen (as ammonium), and thus behave in a similar way as fertilizer.  No matter the source, fertilizer or manure, once nitrogen is converted to the nitrate form, it is subject to the same mechanism of loss, such as leaching.  

Q: Does corn production require nitrogen fertilization to produce acceptable yields? 
A: If no nitrogen is applied from fertilizer or manure, corn yields with corn following corn would be approximately 60 bu/acre and for corn following soybean would be approximately 115 bu/acre. With adequate nitrogen fertilization, corn yields can easily reach 200 or more bu/acre.   

Q: What is the impact of application timing and nitrate levels in surface water? 
A: Moving application of nitrogen from a post-harvest fall application to a spring pre-plant application is expected to reduce nitrate-N loss by an average of 6%.  A sidedress application of nitrogen after the crop is growing compared to a spring pre-plant application is expected to reduce nitrate-N loss by an average of 7%. 

Nitrate Movement 

Q: How do nitrates get into water? 
A: Nitrate is a form of nitrogen that is found naturally in soils and becomes available to plants as soil organic matter mineralizes, a natural biologic process that is part of the nitrogen cycle.  Nitrate is also found in commercial fertilizer sources or becomes available as a commercial fertilizer source undergoes natural processes in the soil in the presence of the right temperature, moisture and microbial activity.  Nitrate can also come from septic systems.   
Nitrate is a soluble form of nitrogen that moves with water through the soil.  The process of nitrate movement is called leaching.  If the landscape is tile-drained, excess water will exit the soil profile via the tiling system more quickly than if the field was not tile drained. This water often carries nitrate.  Tile water is often discharged into drainage ditches and drainage ditches drain to surface water sources such as streams and rivers.  In non-tiled areas we still see nitrate leaching losses but in these areas the nitrate movement to downstream waters is through natural subsurface flow pathways. 

Q: What was nitrate loss before settlement? 
A: While difficult to assess without monitoring data, we do have results from replicated plots with diverse prairie where one prairie treatment is fertilized with nitrogen and one is not. We see concentration of nitrate-N of less than 1ppm in drainage from the prairie (with or without fertilization) compared to nitrate-N concentrations of 10-12ppm from a corn/soybean rotation. 

Q: What is the expected tile-flow nitrate-N concentration with nitrogen application in a corn production system? 
 A: If corn is not fertilized with nitrogen, the tile-flow nitrate-N concentration will be approximately 7 ppm from natural processes of microbes mineralizing soil carbon. At optimal nitrogen application rates, that is, at the maximum economic return to nitrogen rate, tile-flow nitrate-N concentration will be approximately 18 ppm for continuous corn and 12 ppm for corn/soybean rotation. The tile-flow nitrate-N concentration increase is 150% for continuous corn and 74% for corn rotated with soybean. 

A video was created with Dr. Matt Helmers and Dr. Mike Castellano describing the nitrogen cycle and nitrate loss.
 

Nitrogen Loss Reduction Loss 

Q: As the landowner, how can I work with my tenant to make sure we are using the best practices for our land and for the water?  
A: The Iowa Nutrient Reduction Strategy has identified in-field management practices and edge of field practices and structures that can minimize the loss of nitrogen and phosphorus to water.  Have a conversation with your tenant about management practices and structures currently used on your farm.  The publication "Reducing Nutrient Loss: Science Shows What Works" outlines the average effectiveness of each practice for reducing nitrogen and phosphorus loss. 

Q: What will it take to reduce nitrate-N leaving corn and soybean fields? 
A: The nitrate-N concentration in tile-flow is about the same in the corn year and soybean year when corn is rotated with soybean. In continuous corn, the concentration is higher due to the required higher optimal nitrogen rate. The requirement to apply nitrogen for optimal corn production means it would be impossible to completely reduce nitrate-N loss to acceptable levels simply through in-field practices outlined in the science assessment for the nutrient reduction strategy. It will take a suite of practices, in-field agronomic practices, crop rotation or cropping system changes, and edge-of-field treatment practices on the majority of crop production acres to reduce levels in order to meet nutrient reduction goals.  

Q:  What is the Iowa Nutrient Reduction Strategy? 
A: The Iowa Nutrient Reduction Strategy is a voluntary, science-based plan that addresses the Hypoxia Task Force goal of reducing nitrogen and phosphorus loading to the Gulf of Mexico by 45%.  The Nutrient Reduction Strategy science team, led by Iowa State University, evaluated in-field and edge-of-field practices and determined an average effectiveness for reducing the loss of nitrogen and phosphorus.  A four-page publication outlining the practices identified and their effectiveness can be downloaded through the ISU Extension Publication Store. 
 

Des Moines Water Works Processes

Q: What process does Des Moines Water Works use to remove nitrates from the river?  How can they return the removed nitrates back into the river? Can the removed nitrates be land applied? 
A: Des Moines Water Works monitors nitrate-N concentrations in the Des Moines and Raccoon Rivers.  These waters serve as the source waters used for drinking water for the city of Des Moines and surrounding communities.  The nitrate removal facility is used when the nitrate-N levels are over the safe drinking water limit of 10 parts per million (ppm).  A sodium chloride-coated resin material is used to treat the source water with high nitrate levels.  As the water passes through the resin, nitrate ions are captured and chloride ions are released back into the water. The nitrate that is removed from the resin is diluted and discharged back into the Raccoon River according to a National Pollutant Elimination System (NPDES) permit issued by the Environmental Protection Agency (EPA).  Because the nitrate-N concentration is so low, it is not economically feasible to use the removed nitrates as a fertilizer source.  
Source: Des Moines Water Works 

Q: Why did DMWW need to run their nitrate removal system more frequently in late 2014 than in other years? 
A: Iowa received higher than normal rainfall and temperatures during the fall of 2014 making conditions favorable for mineralization of N into the nitrate form. Additional rainfall caused leaching of nitrate and higher than normal levels of nitrates in the Des Moines and Raccoon Rivers. In addition, we had little surface runoff of water during this time that would have lowered the dilution rate.   

Q: Why do farmers in the 3 counties targeted by the potential Des Moines Water Works lawsuit use tile drainage and what would happen if there was no tile drainage?   
 A: Tile drainage allows for excess water to drain away from farm fields making them suitable for crop production.  Approximately 68% of Buena Vista County, 61% of Sac County, and 60% of Calhoun County cropland is tile drained.  A significant area of land in each of these counties would not be as productive without the use of tile drainage.

Drainage Districts Identified in the Intent to File Lawsuit 
Drainage Districts named in the intent to file letter include 32, 42, 65, 79, 81, 83, 86, and shared districts 2-51, 19-26, and 64-105.  

drainage districts in small section of iowa

Q: Are there watershed projects in the area currently addressing water quality concerns? 
A: Watershed projects are focused efforts to improve water quality on a watershed basis.  Projects involve planning, identifying natural resource concerns, education and outreach, and dedicated cost-share funding for the implementation of water quality improvement practices on the landscape.  The Elk Run Watershed Project in portions of Sac, Carroll and Calhoun Counties and the Headwaters North Raccoon River Project in portions of Buena Vista and Pocahontas counties were recently awarded funds through the Iowa Department of Agriculture and Land Stewardship’s Water Quality Initiative to address nutrient loss and improve water quality.  Watershed projects funded through other sources include: 

Project Name County/SWCD Project Type
North Raccoon Headwaters Project Buena Vista MRBI*
North Raccoon River Partnership Buena Vista, Pocahontas, Clay MRBI*
Cedar Creek Project Pocahontas, Buena Vista, Palo Alto, Clay MRBI*
Black Hawk Lake Watershed Project      Sac, Carroll WPF, WSPF, 319**

*Mississippi River Basin Initiative funding through NRCS
**Water Protection Fund, Watershed Protection Fund, and Environmental Protection Agency Section 319 of the federal Clean Water Act

Private Well Water Testing

The State Hygienic Laboratory (SHL) provides private well water testing services in Iowa. For concerns about private well water quality or if it has been more than a year since the last test was taken, it is recommended to test for two indicators of general safety and quality of drinking water, nitrate and coliform bacteria. You can request a test kit for nitrate and coliform bacteria from SHL. If you would like more information about other well water concerns such as taste, odor, or color SHL does offer additional water quality tests. If you would like to know more about well water testing check out the SHL frequently asked questions page.

Pages